Advertisement
Installation
Connecting a Door 4/5
4. Connect the Inputs
Both the Door Position Indicator (DPI) and the Request-to-Exit (REX) inputs are dry contacts.
Installing these inputs is optional. They can be configured in Verkada Command.
Door Position Indicator (DPI)
Verkada AC12 expects the DPI to be
NORMALLY CLOSED (NC)
The REX can be configured in Verkada Command to release the lock; this is most commonly seen in
electromagnetic locks. The REX unlock time and normal state can be configured.
Note: If using AC12 in an exit configuration, you will need to support a form of physical security egress.
21
Request-to-Exit (REX)
Verkada AC12 expects the REX to be
NORMALLY OPEN (NO)
Verkada Inc. 406 E 3rd Ave, San Mateo, CA 94401
sales@verkada.com
All specifications are subject to change without notice
Copyright © 2023 Verkada Inc. All rights reserved.
Advertisement
