Name And Function Of Each Part - Power Acoustik PAVN 7210 Instruction Manual

Name and Function of Each Parts
■ Front Panel Description
1 Power (([)) button
Turns on or off the power.
2 Play/Pause ( ) button
Pauses and replays a disc.
3 STOP ((y ; ] button
Stops a disc.
4 Volume (+) button
Adjusts the volume up,
5 Volume(-) button
Adjusts the volume down.
The max, volume level is 15 when you turn the unit on
even if you set more than 15.
6 BAND {) button
Selects AM,FM1 or FM2.
7 MODE ( (' M ) button
Selects one of the following mode.
— DVD- - NAVI-» RADIO " AVI AV2 'ETU? |
8 Hard Reset (©)
9 TILT (button
Selects one of the following view angle.
I r-lS -►JO -* -*€Q
-^7S
'-9Q -j
10 S.C/EQ(i3j) button
Selects sound condition control menu.
- BASS • r'lD ^ TREBLE .'-BALANCE
Press less than a second to select sound condition
control menu.
Selects equalizing menu.
-►CLASSIC- =OP-► ROCK—►eO'TFF-—
Press more than a second to select equalizing
menu.
Change the setting of the BASS, MID or TREBLE
when EQ is off.
11 SEEK FR ( |<^) button
Track changes in DVD mode.
Increases frequency in Radio mode.
In DVD Title menu, It is activated as Down key if
Previous key is pressed shortly and It is activated as
Left key if Previous key is pressed long.
12 SEEKFF( N )button
Track changes in DVD mode.
Decreases frequency in Radio mode.
In DVD Title menu, It is activated as Up key
if Next Key is pressed shortly and it is activated as
right key if Next key is pressed long.
13 Remote Control Eye
14 MUTE {(^O) button
Turns on or off the Sound.
Navi. Auto change on/off button when you press this
more than 2 seconds(long key).
15 EJECT^ button
The disc is ejected.
06