Power Acoustik PAVN 7210 Instruction Manual page 5

Gps navigation mobile video system 6.5 inch wide tft lcd monitor
Table of Contents

Advertisement

■ Loading and Replacing the remote battery
1
Use two "AAA" size batteries.
Slide the cover while pressing downwards to
remove it as illustrated.
2
Insert the batteries with the + and - poles aligned
properly, following the illustration inside the case.
|v\rarning_
Do not set the remote control on hot places such as above the dashboard.
■ Cleaning the panel and monitor
^ When the operator panel and monitor panels are dirty, wipe and clean them using a soft cloth (such as a
commercially available silicon coated cloth).
When contaminated excessively, clean them using a cloth dipped in a neutral detergent first, then remove
the detergent using a dry cloth.
^ Do not use a hard cloth or a volatile chemical (such as an alcohol).
If you used, the panel surface may be scratched or printed letters may be erased.
■ Cleaning the disc slot
As dust can accumulate in the disc slot dean it occasionally.
Your discs can get scratches if you put them in a dusty disc slot,
■ Lens Fogging
Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the disc
player of the unit causing lens fogging, discs may be impossible to play. In such a situation, remove the disc
and wait for the condensation to evaporate.
If the unit still does not operate normally after a while, consult your dealer.
Cauiion
If it is activative with over limited output, it will down the volume output for the safety set,
Volume function will be stop temporarily untill the set become stabile status.
(After the set is stabile. Volume function will be keep in stabile status.)
04

Advertisement

Table of Contents
loading

Table of Contents