Table of Contents
Advertisement
Quick Start Guide to Navigation
1
Press the mode button or center of the screen.
The following screen will be display with last mode is
already selected.
The mode changes each time when the mode button is
pressed.
I^BI
WBr
2 Leave it about for 5 seconds when NAVi is selected or
press the |
| icon directly.
then the NAVI mode will be start for a moment.
3 If there is no SD card, following screen will be on, then
Insert the SD card Into the SD Card slot as Indicated.
4 Following screen will be display once after the power on.
otherwise the last NAVI screen will be on,
5 Read information and press 1 1 agree button at the
bottom of the screen.
Information
Please do not operate the controls of goNgo
while driving. Doing so could endanger yourself,
your passengers and other road users.
Please observe the actual traffic signal.
6 Go out after you have installed the device, so that the
GPS receiver can locate your position.
This may take up to 30 minutes the first time the device
is used.
When satellite lock is achieved the screen displays
your position on its map in a '3D' navigation view.
Advertisement
Table of Contents
