Table of Contents
Advertisement
■ 6a&s Setup
riJ
1
Select the Sub Menu mode by pressing the ( > ) button
at the above initial screen setup screen (page 58).
2 Then select Sub Menu that you want by pressing the
(A
) or (
V
) button.
Sub Menu changes each time the button is pressed from
BASS to BALANCE.
3 Stop at the
BASS
menu.
Press the ( >) button,
4 Change the BASS value by pressing the ( a ) or
( V } button or volume dial.
The BASS changes each time the button is pressed from
-6 to +6.
5 Press the enter ( ©) button after you change the BASS.
Then press the exit (-S ) button.
It will returns to the previous mode.
6 If youd like to change the Sub Menu, press the ( <
)
button or turn the volume dial.
■ Middle Setup
1 Select the Sub Menu mode by pressing the ( > ) button
at the above initial screen setup screen (page 58).
2 Then select Sub Menu that you want by pressing the
( A ) or ( V } button.
Sub Menu changes each time the button is pressed from
BASS to BALANCE,
^-— -.-MtODLE
TREBLE-^ FADER-»BALANCE
3 Stop at the MIDDLE menu.
press the ( > ) button.
♦
4 Change the middle by pressing the (
a
) or ( v) button
or volume dial.
The middle changes each time the button is pressed -6
to +6.
5 Press the enter (© ) button after you select the middle.
Then press the exit (-ii) button,
It will returns to the previous mode.
6 If you'd like to change the Sub Menu, press the (< )
button or turn the volume dial.
63
Advertisement
Table of Contents
