Cherry theobroma JAGUAR SBC-RK3588-AMR User Manual page 23

(continued from previous page)
# Make the resulting files available to later steps
This step should take about 1 minute total.
6.2.2 Enter USB flashing mode
Connect a USB-C cable between the (see Fig. 2.4 Buttons and Download USB Type-C port) and a
USB port of your host PC.
Make sure there is no SD card inserted into the board.
Push the button (see Fig. 2.4 Buttons and Download USB Type-C port).
Push the button and release the button.
The command on your host PC should return the following:
6.2.3 Flash the eMMC
To write the image file path stored in the variable to the on-board eMMC, run:
This step should take about 1 minute for the Debian image.
v1.0
Page 20