Advertisement
Safety Alert Symbol
This Safety Alert Symbol is used in this
instruction sheet and on the machine to identify
important safety messages which must be
followed to avoid accidents.
This symbol means: ATTENTION!
BECOME ALERT! YOUR SAFETY IS
INVOLVED!
Figure 2
Safety alert symbol
The safety alert symbol appears above
information which alerts you to unsafe actions or
situations and will be followed by the word
DANGER, WARNING, or CAUTION.
DANGER: White lettering / Red background.
Indicates an imminently hazardous situation
which, if not avoided, Will result in death or
serious injury.
WARNING: Black lettering / Orange
background. Indicates a potentially hazardous
situation which, if not avoided, Could result in
death or serious injury.
CAUTION: Black lettering / Yellow
background. Indicates a potentially hazardous
situation which, if not avoided, May result in
minor or moderate injury.
Important calls attention to special mechanical
information and Note emphasizes general
information worthy of special attention.
WARNING
While maintenance or adjustments are
being made, someone could start the
engine. Accidental starting of the engine
could seriously injure you or other
bystanders.
Remove the key from the ignition switch
and engage parking brake before you do any
maintenance.
Note: Determine the left and right sides of the
machine from the normal operating position.
Installing the Jack Mount Kit
1. Stop the engine, wait for all moving parts to
stop, and remove key. Engage parking brake.
2. Remove and retain the UltraVac counter
weight(s) if so equipped, the front floorpan and
floorpan liftout panel (which may be hinged in
older models) (see Figure 4).
1.
Floorpan liftout panel
2.
Front floorpan
3.
Counter weight
3. Place the jack mount bracket (item 2) onto the
front frame as shown in Figure 1.
4. Install the jack mount receiver (item 4) onto
the jack mount bracket and secure with two
3/8-16 x 3 inch carriage bolts (item 3) and two
3/8-16 flanged nyloc nuts (item 1).
2
Figure 3
Figure 4
Advertisement
