Measurement Error Occurrence And Actions; Problems In Use; Packing And Transportation - Accuniq BC 380 User Manual

SELVAS Healthcare

Measurement Error Occurrence and Actions

Error Cause
･ Imbalance of water, such as
When the percentage
of body fat is immediately after exercise, after
measured too high or bathing, after sweating a lot, and
too low drinking a lot of water
･ Moving or speaking during
measurement
･ When the hand electrode, or
measurement areas such as hand,
foot, etc. is unclean
･ Disconnection between the electrode
When measurement
is not performed handle and the main body, or bad
contact
･ The Start measurement button
inoperative
･ The electrode handle is not
connected to the main body.
･ There is a problem with the
electrode handle.
56
_Problem Solving
Action
･ After reading the 'Precautions for
Measurement', measure again according to
the measurement method.
･ Be careful not to move or speak during
measurement.
･ Wipe the electrode part of the hand
electrode with soft gauze and measure
again.
･ If your hands and feet are sweaty or dirty,
wash them and measure again.
･ Check whether there are no foreign substances
between the electrode and the measurement
area.
･ Please contact us or a designated vendor.
･ Check whether the electrode handle is
connected to the main body, and then
connect it.
･ If this problem persists even though the
electrode handle is connected, contact us
or a designated vendor.

Problems in use

If there is a problem with the device, please follow the steps below:
1) Please check again according to the measurement inspection items.
If the problem persists, please contact us or a designated vendor.
2) When contacting us or a designated vendor, please briefly write down the model name, serial number,
date of purchase, and description of operational defect.
3) We are committed to meeting the needs of our consumers.
For devices we manufacture, we have trainedand skilled after-sales service technology, and if there is a
problem with the device, we will promptly solve it with the best service.
Note
For our address and contact information, please refer to the back of the user manual.

Packing and Transportation

We have packed this device in the most suitable way to transport it safely. Moving or transporting in a
manner other than this packaging method may result in damage to the device itself.
For packaging and transportation of the device, you must handle it with care so that the device is not subject
to shocks while in its packaging.
If this device needs to be transported while in use, repack it in the following order:
1) Turn off the power to this device.
2) If peripheral devices are connected, power off and disconnect each device.
3) Disassemble the device in the reverse order of assembling it.
4) Repack it using the stored packaging material of this device.
5) Transport the device with the utmost care to avoid shocks.
User Manual BC380
57
Problem Solving_