Pc Connection - Wireless (Bluetooth); How To Connect Printer; Blood Pressure Monitor Connection - Accuniq BC 380 User Manual

SELVAS Healthcare

PC connection - wireless (Bluetooth)

Connect the Bluetooth Dongle provided by the company as an option to the Bluetooth terminal on the rear
side of the device. Please refer to the Bluetooth Setup section of the ACCUNIQ Manager manual.

How to connect printer

1) How to directly connect the device-printer
Connect the A4 printer to the USB (A) port on the back of this device with a printer cable.
2) Connecting the device to computer-printer.
If you want to view the measurement results by connecting the A4 printer to the computer, connect it to
the computer using the USB cable to the USB (B) port on the back of the device, and then connect the A4
printer provided by our company with the printer cable. Then, you can print the analysis results.
24
_Installation
Note
1. When you want to save or search customer data using the Data Management Program
provided as standard, you must connect the computer where this program is installed,
and in this case, you can print through the computer.
2. If you select professional consulting software as an option, various print contents are
provided, and special paper is not used in this case.
3. For information on how to install and use Windows programs, refer to the user manual
built in each program.

Blood Pressure Monitor connection

This device can be connected to the autonomous Blood Pressure Monitor as an option.
Connect the Blood Pressure Monitor (RS-232C) terminal on the rear part of this device and the Blood
Pressure Monitor with the provided Blood Pressure Monitor cable.
Note
For the RS-232C communication cable connecting the Blood Pressure Monitor, be sure
to use the dedicated cable (within 1.5 meters) provided.
User Manual BC380
25
Installation_