SELVAS Healthcare
INSTALLATION
Power connection
1) Connect the adapter provided by our company to the Adapter port installed on the rear part of this device.
2) After connecting the wires, turn on the power switch.
Caution
1. You must turn the power off before connecting this device to peripherals.
(An electric shock may be applied to the device, which may affect its performance.)
2. When this device and peripheral devices are connected, the power supply must start
with this device to maintain the performance and safety of the device.
3. Be sure to use the adapter and cable provided by our company for power supply.
4. When turning on the device's power switch, be careful not to touch the base part
where there is a scale. If weight is applied to the base part, an error occurs in the '0'
point of the scale by that weight, making the weight measurement inaccurate.
5. Do not install the equipment where power can not be disconnected.
External connection
Caution
1. Connect only items that have been specified as part of the device or that have been
specified as being compatible with the device
2. In the event of a cybersecurity breach, stop using the device and contact the manufacturer.
3. When using Bluetooth communication, it may be affected or may be affected by
devices using other wireless systems nearby.
22
_Installation
PC connection - Wired (USB cable)
Connect the USB (B) port on the back of the device to the computer USB port using a USB cable.
Note
1. If use USB port, the cable should be connected to the computer port.
2. When use computer port, USB driver should be installed at first.
For more information, please refer to the software user manual in the supplied USB
memory. It is recommended to use a USB cable shorter than 3m (121 inches).
Note
1. In order to save, search and retrieve the users' data, the user should connect the
analyzer to the computer installed data management software offered free.
Printing is done through computer in this case.
2. The professional consulting software optionally provides various printouts.
In case of using the software, the pre-printed result sheet is not used.
3. Please refer to the software user manual in the supplied USB memory.
Caution
1. The PC that connects to the device must comply with IEC60950-1.
2. The PC must be kept up to date latest operating system for cybersecurity.
Therefore, make sure all the latest updates and security patches.
User Manual BC380
23
Installation_