SELVAS Healthcare
How to replace thermal paper in the thermal printer
You have to replace thermal paper while the power is on.
1) Open the printer cover by turning the thermal printer fixing screw counterclockwise as shown in the picture.
2) Remove the protective thermal paper inserted into the thermal printer by pulling it slowly in the direction of
the arrow.
3) If you gently push the end of the thermal paper toward the printer inlet as shown in the picture,
the thermal paper will be printed and the paper will be cut automatically.
4) Close the printer cover and fix the printer cover by turning the fixing screw clockwise.
1
3
4
26
_Installation
2
[Thermal printer FEED/CUT function]
・ FEED function
If you enter the password '5555' and press 'OK'
on the user setup screen, thermal paper will be
printed out.
Note
Do not pull the paper during thermal paper printing. When printing is complete, the paper
is automatically cut.
Operation of the device during printing may cause devicefailure.
User Manual BC380
・ CUT function
If you enter the password '8888' and press 'OK'
on the user setup screen, thermal paper will be
cut.
27
Installation_