Measurement; Basic Analysis - Accuniq BC 380 User Manual

SELVAS Healthcare

Measurement

Basic analysis

If you want to measure, stand on the device's scale.
1) Measure Weight
･ When you step on the scale, the screen changes
with a chime bell, and the weight measurement starts.
At this time, do not move or speak until the weight
is completely measured, and be careful not to place
your hands on other parts or lift an object while
measuring on the scale.
2) When the weight measurement is completed, the
measurement result is displayed.
Select either member examination or non-member
examination.
3) Enter personal information
Data required for analysis is entered in the following
order: ID, height, age, and gender.
･ Enter ID (for member examination)
･ The 'ID' field blinks first.
･ Enter your ID on the touchpad.
You can enter up to 20 characters including
alphanumeric characters.
･ Enter your date of birth
･ Enter the measurer's date of birth using the numeric
keypad of the touchpad.
38
_Measurement and Analysis
･ Enter gender
･ Select the gender, male or female using the touchpad.
･ Enter height
･ Enter the height of the user using the keypad and
the numeric keypad of the touchpad.
･ Analysis is not possible if the height of the user is out
of the input range.
･ After entering it, press the 'Next' button.
4) Start measurement - fix foot position
･ Stand with your feet in contact with the foot
electrode correctly.
5) Start measurement - contact with the hand electrode
･ Wrap and hold the hand electrode with your entire
hand so that all your fingers contact with the
electrode.
User Manual BC380
39
Measurement and Analysis _