Invalid_Bits_In_Identify_Message; Diagnostic_Failure; Power_On_Or_Selftest_Failure; Internal_Controller_Error - Philips CDD522 Operating Instructions Manual

3DH
40H
42H
44H
47H
50H
53H
57H
5AH
63H
64H
65H
INVALID BITS IN IDENTIFY MESSAGE
Indicates that the IDENTIFY MESSAGE
is corrupted.
(Sense key: ABORTED COMMAND).
DIAGNOSTIC FAILURE
(Sense Key: UNIT ATTENTION).
POWER-ON OR SELF TEST FAILURE
Indicates that a power-on self-test sequence failed.
(Sense Key: UNIT ATTENTION).
INTERNAL CONTROLLER ERROR
Indicates that the controller detected an error which could not be
otherwise explained.
(Sense Key: HARDWARE ERROR).
SCSI PARITY ERROR.
Indicates that the controller detected an parity error.
(Sense Key : ABORTED COMMAND).
WRITE APPEND ERROR
Indicates that a append by a WRITE command during writing failed.
(Sense key: ABORTED COMMAND).
MEDIUM LOAD OR EJECT FAILED
Indicates that loading or unloading of the disc failed.
(Sense Key: HARDWARE ERROR).
UNABLE TO READ TOC, PMA OR SUBCODE.
Indicates that the drive was unable to read the TOC, PMA or
subcode of the current disc.
(Sense Key : MEDIUM ERROR).
OPERATOR MEDIUM REMOVAL REQUEST
Indicates the operator requested to unload the disc.
(Sense key: NOT READY).
END OF USER AREA ENCOUNTERED ON THIS TRACK
Indicates that the requested block exceeds the current track.
(Sense Key : ILLEGAL REQUEST).
ILLEGAL MODE FOR THIS TRACK.
Indicates that the data on the track is not according the mode which
is requested by the command. (e.g. block size < 2332 bytes for
mode-2 tracks or READ DATA from audio track.)
(Sense key : ILLEGAL REQUEST).
VERIFY FAILED.
Reaction on the VERIFY command when the verification was not
successful.
(Sense key : VENDOR SPECIFIC).
=57—