Operating The Cd-Recorder On The Computer; Software Installation; Command Description - Philips CDD522 Operating Instructions Manual

Operating the CD-Recorder on the computer
Obviously, specific Application Software running on the computer
platform in use, designed to work with the Philips CDD522
CD-Recorder, must be used in order to be able to operate the
CD-Recorder correctly. Refer to section "Host interface
connections" for examples hereof.
SOFTWARE INSTALLATION
The installation and operation of the necessary software is
dependent on the Host computer configuration in which the
CDD522 is to be used, e.g. PC's, Mini's, Workstations running
MS-DOS, UNIX or other Operating Systems. Contact your
supplier for the full list of supported host configurations and
available software packages.
COMMAND DESCRIPTION
The following lists the supported SCSI commands. An extensive
description of the total command set is available on request.
MESSAGES
* Following messages are implemented in the CDD522:
| code | Description Directions
command complete in
save data pointer in
disconnect in
abort out
message reject in out
no operation out
bus device reset out
identify in out
in = Target to initiator
Out = Initiator to target