Philips 26PW6341/37 User Manual page 7

F
our TV can automatically set
itself for local area (or Cable
TV) channels. This makes it easy
for you to select only the TV sta¬
tions in your area when the
CHANNEL (+), (-) buttons are
pressed.
Note: Make sure the antenna or
cable signal connection has been
completed before AUTO PRO¬
GRAM is activated.
Press the MENU button on
I the remote to show the
onscreen menu.
Press the CURSOR UP ►
^ or DOWN ■ buttons to
scroll through the onscreen
menu until the word Install
is highlighted.
Press the CURSOR
^ RIGHT ►► button to display
the Install menu features.
J Press CURSOR UP ►or
DOWN ■ buttons to scroll
the Install features until the
words Auto Program are
highlighted.
^ Press the CURSOR
^ RIGHT ►► button to start
the Auto Program scanning
of channels. Auto
Programming will store all
available channels in the
TV's memory then tune to
the lowest available channel
when done.
# When finished, press the
STATUS /EXIT button to
remove the menu from the
TV's screen.
Qooo
® (D (D
® (D CD
® ® CD
© ® ®
Helpful Hints
When CABLE is selected, channels 1 -
125 are available.
When ANTENNA is selected, chan¬
nels 2-69 are available.
When AUTO is selected, the TV will
automatically set itself to the correct
mode based on the type of signal it
detects when the AUTO PROGRAM
feature is activated.