Philips 26PW6341/37 User Manual page 20

Setting Up an Access Code
/^ver the next few panels you'll
learn how to block channels
and get a better understanding of
the rating terms for certain pro¬
gramming.
First, let's start by learning how to
set a personal access code:
M Press the MENU button on
I the remote to display the
^ onscreen menu.
^ Press the CURSOR UP ► or
^ DOWN ■ buttons until the
word Features is highlighted.
Press the CURSOR RIGHT
^ ►► button to display the
Features menu options.
J Press the CURSOR UP ►or
DOWN ■ buttons until the
^ words Auto Lock'^^ are high¬
lighted.
^ Press the CURSOR RIGHT
^ ►► button. The screen will
read, "Access Code-
# Using the NUMBERED but-
tons, enter 0, 7,1,1.
"XXXX" appears on the
Access Code screen as you
press the numbered buttons.
'Tncorrect Code" wiU appear
on the screen, and you will
need to enter 0, 7,1,1 again.
The screen will ask you to
^ enter a "New Code." Enter a
"new" 4 digit code using the
NUMBERED buttons. The
screen wiU then ask you to
CONFIRM the code you just
entered. Enter your new code
again. "XXXX" will appear
when you enter your new code
and then display the
AutoLock'^^ menu options.
Proceed to the next panel to learn
more...