Philips 26PW6341/37 User Manual page 32

Remote Use - Code Entry for Accessories
/
fyour remote corWol will not operate
your accessory de\dces, look up the
four-digit code listed by your brand on
panels 30-32.
Please read though steps 1-5 before
beginning.
Place the TVA^CR/ACC Mode
Switch in the proper position.
^ Press the VCR • RECORD but-
# ton on the remote control and
release.
^ Press the AUTO SOUND button
% on the remote within 30 seconds,
then release.
^ Enter the FOUR-DIGIT
11
REMOIT: CODE NUMBER
for
^ your desired device. The remote is
now ready to send commands to
the unit.
^ Point the remote at the Device.
^ Press the POWER button on the
^ rmote to turn the unit ON.
If this doesn't work the first time, repeat
the steps using another remote axle num¬
ber.
VCR
Cable Box
DBS or other Accessoiy Device