Philips 26PW6341/37 User Manual page 33

J
Tie Search Method of programming
your remote can take as long as 12
minutes to perform so we recommend you
use it as a last resort.
Please read all the steps below b^ore
beginning.
M
Press the POWER button on the
1 device your are attempting to pro-
^ gram to turn it ON.
If programming a VCR or DVD
# ty^ product that has a STOP play
command, place a VCR T;me or
DVD disc mto the device. Press the
PLAY button.
Place the TVA^CR/ACC Mode
^ Switch in the proper position. VCR
^ for programmmg vddk) Cas sette
Recorders or ACC for aU other
accessory devices.
J Press the VCR-RECORD and
« the AUTO SOUND buttons
^ simultaneously and hold them
down.
As you continue to hold down
buttons, the remote will run through
its programmed code list with a
command for the VCR or DVD to
STOP play. Or, for Cable Boxes
and Satellite Receivers the com¬
mand will be to CHANGE
CHANNELS.
^ When the STOP command happens
^ release the two buttons.
^ Or for Cable Boxes and Satellite
Receivers, as soon as the channel
changes ONCE. IMMEDIATELY
release the two buttons.