Table of Contents
Advertisement
OPERATING INSTRUCTION FOR SAFETY VALVE
Lenhardt & Wagner GmbH
An der Tuchbleiche 39
D-68623 Lampertheim – Hüttenfeld
www.lw-compressors.com
Operating Instruction
Safety valve
Typ:
SiV2 BKZ TÜV.SV.19-1140.5.G.V.P CE 0091 AlMgSi1 F31 1100* Lenhardt & Wagner
Set pressure:
Maximum outflow:
Suitable media:
The safety valve is used for protection of pressurized components, eg pipelines, pressure vessels, or
the compressor itself.
The hand wheel on the top of the safety valve is marked with the adjusted set pressure.
1) Identification of set pressure
2) Seal
1
3) Fixing screws
4) Venting srew (hand wheel)
5) Identification serial number
6) Socket for safety valve
1
The fixing screws M8 must be strength class 8.8 and meet the requirements of Merkblatt AD 2000 leaflet W7.
Shaft length 70mm.
see mark (hand wheel on top of valve)
Set pressure 100-159 bar:
Set pressure 160-350 bar: 1.100 l / min
Media-resistant, non-corrosive gases
750 l / min
Safety valve with socket
1
Page
Advertisement
Chapters
Table of Contents
