L&W SC-180 ES Operating Instructions Manual page 29

F I R S T C O M M I S S I O N I N G
Check oil level
Warning
!
Check oil level daily. Never start the compressor with a too low oil level. Risk of accidental
loss, destruction or deterioration.
The oil level should be between the middle and upper end of
the oil sight glass. Never start the compressor with a too low
oil level.
Refill new compressor oil at least when the oil level reached
the middle of the indicated area.
Warning
!
• First oil change after 25 operating hours.
Check V-belt tension
The V-belts could lose tension during transportation. Please check the V-belt tension before starting
the compressor.
Tension V-belts / Correct V-belt tension
See chapter "Service and Maintenance" -> "Tension V-belts"
LW SC-180 ES / LW SC-250 ES
Version: 09.12.2022
Oil sight glass
A
Seite A - 27