To Set The Wireless Connection - Daikin ATXM20A2V1B User Reference Manual

6 | Operation

6.12.3 To set the wireless connection

To confirm the wireless LAN connection status
User reference guide
38
INFORMATION
Scan the QR code to download and install the ONECTA app on your mobile phone or
tablet:
There are two options to connect the wireless adapter to your home network.
▪ Using a smart device (smartphone, tablet) and SSID (Service Set Identifier) and
KEY (password)
▪ Using the WPS (Wi-Fi Protected Setup) button on your Wi-Fi router.
For more information and FAQ, refer to app.daikineurope.com.
Note: Setting is done by the wireless remote control in the wireless LAN setting
menu. During setting, always aim the wireless remote control at the infrared signal
receiver on the unit.
INFORMATION
Make sure operation is stopped before setting the wireless connection. Connection
CANNOT be made when the unit is in operation.
1 Stop operation before setting the wireless connection.
2 Make sure the wireless router is close enough to the unit and nothing
obstructs the signal.
Menu Description
Connection status check
Connection using WPS button
Connection using SSID and KEY
Reset to factory default
Wireless LAN OFF
1 On home screen menu, press and hold
is not operating.
Result: The SP (wireless connection setting menu) appears. is blinking.
(5 sec.)
2 Press to confirm the selection.
Result: is blinking.
3 Check the Daikin eye.
for at least 5 seconds while the unit
Daikin room air conditioner
4P518786-13K – 2023.06
ATXM-A