Operation; Operation Range; When To Use Which Feature - Daikin ATXM20A2V1B User Reference Manual

6 Operation

6.1 Operation range

6.2 When to use which feature

ATXM-A
Daikin room air conditioner
4P518786-13K – 2023.06
INFORMATION
The indoor unit is delivered with the wireless remote control as the user interface.
This manual describes only operation with this user interface. If another user
interface is connected, refer to the operation manual of the connected user
interface.
Use the system in the following temperature and humidity ranges for safe and
effective operation.
In combination with outdoor units: 2AMXM and 3AMXM
Outdoor temperature
Indoor temperature
Indoor humidity
(a)
A safety device might stop the operation of the system if the unit runs outside its
operation range.
(b)
Condensation and water dripping might occur if the unit runs outside its operation range.
In combination with other outdoor units
Outdoor temperature
Indoor temperature
Indoor humidity
(a)
A safety device might stop the operation of the system if the unit runs outside its
operation range.
(b)
Condensation and water dripping might occur if the unit runs outside its operation range.
You can use the following table to determine which features to use:
INFORMATION
Operation modes: cooling, drying and automatic are NOT available for the heating
only version of the product.
Feature
Basic features
(a)(b)
Cooling and drying
–10~46°C DB
18~32°C DB
14~23°C WB
(b)
≤80%
(a)(b)
Cooling and drying
–10~50°C DB
18~32°C DB
14~23°C WB
(b)
≤80%
Tasks
6 Operation
|
(a)
Heating
–15~24°C DB
–15~18°C WB
10~30°C DB
—
(a)
Heating
–20~24°C DB
–21~18°C WB
10~30°C DB
—
User reference guide
21