Step 3: Connect The Scanner - Visioneer PATRIOT 680 SCANNER User Manual

12 V P
ISIONEER ATRIOT
680 S U ' G
CANNER SER S UIDE
10. STOP when you see the "Complete the installation by connecting your
hardware" window. Do NOT click OK yet. Leave the window open and
proceed to "Step 3: Connect the Scanner".
S 3: C
TEP ONNECT THE
To connect the power:
1. Plug the power supply into the power port on the scanner.
2. Plug the power cord into the power supply then into a wall outlet.
Note: Only use the power supply (HEG42-240200-7L made by HiTron)
included with your scanner. Connecting any other type of power supply may
damage your scanner, and will void its warranty.
S
CANNER