Samsung SCD5000 Owner's Instruction Manual page 82

ENGLISH
Playback
•Z, You can connect your camcorder to a TV through a VCR,
1. Connect the camcorder to the VCR with the AudioNideo cable.
• The Yellow plug : Video
• The White plug : Audio(L)
• The Red plug : Audio(R) - STEREO only
2. Connect the TV to the VCR.
3. Set the device to CAMCORDER.
4. Set the power switch to PLAY mode,
5. Turn on both theTV and VCR,
• Set the input selector on the VCR to LINE,
• Select the channel reserved for your VCR on the TV set.
6. Play the tape,
VlDEOc{o_ }
VCR AUDIOO_
) _v m
TENNA C_O_OER
•Z, You can play the recorded tape in PLAY mode,
1. Connect a power source and set the device to CAMCORDER.
2. Set the power switch to PLAY mode,
3. Using the _ (FF) and _ (REW) buttons, find the first position
you wish to play back.
4. Press the )Ill(PLAY/STILL) button,
• The images you recorded will appear on the TV after a few seconds,
• If a tape reaches its end while being played back, the tape will rewind automatica(ly.
• The playback mode (SP/LP) is selected automatically.