Samsung SCD5000 Owner's Instruction Manual page 31

Preparation
I ENGLISH ]
• :, The amount of continuous recording time available depends on :
- The type and capacity of the battery pack you are using.
- How often the Zoom function is used.
It is recommended that you have several batteries available.
_rg _ i_ _
1. Attach the battery pack to the device.
2. Connect the AC Power adapter to the AC cord and connect the AC
cord to a wall socket.
3. Connect the DC cable to the DC jack socket on the camcorder.
4. Turn the Camera power switch to OFF, and the charging indicator
will start to flash, showing that the battery is charging.
©
Blinking lime Charging rate
Once per second Lessthan 50%
Twi_ per second 50% ~ 75%
Threetimes per second 75% ~ 90%
Blinkingstops and stayson 90 ~ 100%
On for a second and Error- Resetthe battery pack and the
offthr a second DCcable
5. When the battery is fully charged, disconnect the battery packand the AC Power adapter from the camcorder.
• Even with the powerswitched off, the battery packwill still discharge if it is left connected to the camcorder.
• The battery pack may be charged a little at the timeof purchase.
• To prevent reduction in the life and capacity of the battery pack. always remove it from the camcorder after
it is fully charged.