70mai S500 User Manual page 5

3. Connecting power cord
Connect the power cord to the power port.
4. Routing cable
Route the power cord to the vehicle's power outlet and connect to power.
Start the car engine, and the dash cam will automatically turn on.
Notes:
•
Use the included wiring trim tool to hide the power cord underneath the headliner and
rubber seal along the A-pillar.
•
Depending on the vehicle, the power outlet may be located in a different position. The provided figure is for reference
only.
5. Adjusting the camera angle
When the dash cam turns on, adjust the camera angle based on the image
presented in the screen.
Downloading 70mai app
This product may be used in conjunction with the 70mai app. You can download and
install the app by scanning the QR code or finding "70mai" in the app store.
Note: Android 5.0 & iOS 11.0 or above is required to connect to the dash cam's Wi-Fi hotspot with
a mobile phone.
03