Advertisement
Quick Links
Advertisement
Related Manuals for 70mai A800S
Summary of Contents for 70mai A800S
- Page 1 User Manual for 70mai A800S 4K Dashcam & Rear Car Camera Set...
-
Page 2: Dashcam Overview
70mai A800S dashcam specifications Video resolution: 4K 3840x2160 Field of view: 140 degrees Aperture: f1.8 Display size: 3" Battery capacity: 500mAh Supported storage: MicroSD (NOT included) 70mai RC06 rear camera specifications Video resolution: FullHD 1920x1080 Field of view: 130 degrees Aperture: f2.0... - Page 3 Rear camera overview 1. Rear camera 5. Plug port B 2. Mount area 6. Rear signal wire 3. Rear camera lead wire 7. MiniUSB power port 4. Plug port A Installation of the dashcam Clean your windshield and put the electrostatic sticker on the recommended area as shown in the figure below.
- Page 4 Insert the memory card into the card slot with its contacts facing up until you hear a click. Attach the mount into the slot and slide up, as shown in the figure below. You will hear a snap when it is in place. Make sure the mount is securely installed on the dashcam.
- Page 5 To add the dashcam on the 70mai app, open the app and tap Add Device. Find 70mai Dash Cam A800S Series in the device list, and tap it to enter the connection process. Turn on the Dash Cam’s Wi-Fi hotspot and then complete the connection following the prompts on the app screen.
- Page 6 To update the firmware on the 70mai app, do the following: 1. Open the 70mai app and tap My devices. In the device list, find 70mai Dash Cam A800S Series. 2. If there is an available update of the firmware, a small red dot will be displayed on the right side of the device name.