Healthrider Lifestyler 831.287922 User Manual page 7

8. Insert the Seat (43) into the Weight Saddle (60).
Slide the 1/8" x 2 3/4" Washer (24) onto the Seat
Bolt (10). Tighten the Seat Knob (40) onto the Seat
Bolt until the Washer is secure against the Seat
Frame (48).
9. Press a'l" Round Endcap (56) into each end of the
Weight Tube (57).
Insert the Weight Tube (57) through the Weight
Saddle (60). Center the Weight Tube in the Weight
Saddle. Thread the Weight Tube Screw (52) fully
into the drilled hole in the Weight Saddle to secure
the Weight Tube.
Slide a Weight Collar (55) onto each side of the
Weight Tube. "lighten the Weight Collars.
10. Pressthe Magnet/Bracket(46) onto the Pedal
Frame(50) as shown.
Slide the Console (45) fully onto the Main Frame
(47) as shown in inset drawing A. Press down on
the Console as shown in inset drawing B until it
snaps into place.
11. Remove the battery cover from the Console (45).
Insert a new AAA battery into the Console. identify
the negative (-) and positive (+) ends of the battery.
The spdng In the battery compartment should touch
the negative end of the battery.
8
48
55_60
45
,.
A
B
11
!
I
"_"" Battery
== = Cover
Battery
7