Table of Contents
Advertisement
4,
Lubricate a Long Axle (15). Attach the Pivot Arm
(51) to the Main Frame (47) with the Long Axle, two
Rubber Shield Washers (14), two 1/4" Washers
(35), and two 1/4" Acorn Nuts (3).
5.
Attach the Long and Short Unk Arms (21, 22) to the
Pivot Arm (51) with the 5/16" x 2" Bolt (16), the
Large Plastic Washer (13), and the 5/16" Nylon
Locknut (5). The Large Plastic Washer (13) must
be on the Indicated side of the Short Link Arm
(22). Note; Part of the Main Frame ts not shown
in this drawing
for easier part indentlflcatlon.
6.
Attach the Handlebar (1) to the Pivot Arm (51) with
two 1/4" x I 1/2" Bolts (37), two 1/4" Washers (35),
and two 1/4" Square Nuts (61).
7.
Slide the Weight Saddle (60) onto the Seat Frame.
(48). The indicated bracket on the Weight
Saddle must be Inserted
into the tube on the
Seat Frame.
4
51
14
Lubricate--15
5
51
16-_
5
6
Tube
6
Advertisement
Table of Contents
