Advertisement
BUTTERFLY BLISS BIRD BATH FOUNTAIN
Review all assembly and care information carefully before using this product. Save this manual for future reference.
Select a smooth, level surface to place the fountain. Assemble components on a soft, clean surface to avoid damaging the finish.
NOTE: When first used, there may be air trapped inside the pump. It may take several minutes for trapped air to escape,
CH-F2023-003
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
HDC-185
allowing water to flow. Refer to page 2 for more troubleshooting tips.
/
/
Order/Customer Reference Number:
Fountain Topper
Fountain Body
with Built-in
Electric Submersible Pump
AC Adapter
IMPORTANT NOTES:
• The water tubing is built into the fountain topper. Take care when
handling the water tube; detaching the water tube from the fountain
topper will damage the unit and void the warranty.
• Familiarize yourself with the flow control valve on the pump, maximum
(+) and minimum (-). This may need to be adjusted to achieve optimal
water flow.
• The lights and light cables are rated for contact with water. Use care
when handling the lights, jarring movements or dropping them may
cause the lights to burn out prematurely.
ASSEMBLY
1. Carefully unwrap the pump that is inside the
fountain. Then, attach one of the light cables on the
pump to the light cable inside the water reservoir.
2. Connect the remaining two pump cables to the light
cables on the underside of the fountain topper.
3. Firmly attach the pump to the tubing that is built
into the fountain topper; it will be a tight fit. Gently
place the topper on the fountain body.
4. Fill the water reservoir with enough water to
keep the pump fully submerged during operation.
NOTE: Ensure the water level does not exceed the
height of the metal tube inside the bowl, the rubber
seal will not completely prevent water from leaking.
5. Connect the AC adapter to the pump power cable.
6. Plug the adapter into a properly grounded GFCI
outlet.
08/2023
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.
Parts
Qty.
1
1
1
Page 1 / 2
Advertisement
Table of Contents
Related Manuals for Sunnydaze Decor HDC-185
Summary of Contents for Sunnydaze Decor HDC-185
- Page 1 Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
- Page 2 Care & Maintenance • Some splashing may occur; adjust the flow rate on the pump if the water rate is too high. Do not use fountain in areas that can be damaged if water happens to splash or leak. • Some climates and weather conditions increase water evaporation, requiring water to be added more frequently. Frequently check water levels during times of high temperatures, wind, and long-term exposure to direct sunlight to ensure the pump remains underwater.
Need help?
Do you have a question about the HDC-185 and is the answer not in the manual?
Questions and answers