Sunnydaze Decor SERENE STONE HDC-277 Manual

POLYSTONE INDOOR FOUNTAIN
Review all assembly and care information carefully before using this product. Save this manual for future reference.
Select a smooth, level surface to place the fountain. Assemble components on a soft, clean surface to avoid damaging the finish.
ASSEMBLY
1. Carefully unwrap the pump that is inside the fountain. Then, attach the light cable on the pump to the light
cable on the underside of the fountain topper.
2. Firmly attach the pump to the tubing that is built into the fountain topper; it will be a tight fit. Gently place the
topper on the fountain body.
3. Fill the water reservoir with enough water to keep the pump fully submerged during operation.
NOTE: Ensure the water level does not exceed the rubber seal inside the water reservoir, the rubber seal will not
completely prevent water from leaking.
4. Connect the AC adapter to the pump power cable.
5. Plug the adapter into a properly grounded GFCI outlet.
NOTE: When first used, there may be air trapped inside the pump. It may take several minutes for trapped air to escape,
CH-D2023-020
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
SERENE STONE
HDC-277
allowing water to flow. Refer to page 2 for more troubleshooting tips.
/ / Order/Customer Reference Number:
07/2023
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.
Parts
Fountain Topper
Fountain Body
with Built-in
Electric Submersible Pump
AC Adapter
IMPORTANT NOTES:
• The water tubing is built into the fountain topper. Take
care when handling the water tube; detaching the
water tube from the fountain topper will damage the
unit and void the warranty.
• Familiarize yourself with the flow control valve on the
pump, maximum (+) and minimum (-). This may need
to be adjusted to achieve optimal water flow.
• The light and light cable are rated for contact with
water. Use care when handling the light, jarring
movements or dropping it may cause the light to burn
out prematurely.
Qty.
1
1
1
Page 1 / 2