Initial Setup - Telefunken S520 Instruction Manual

4.5 Charging the battery
ƒ For the first and subsequent uses, charge the phone battery until fully charged. The icon
displayed on the right upper corner of the screen. The icon
ƒ To use the travel charger, insert the small end of the charging cable into the charging port at the
bottom of the phone. Insert the plug into a power outlet. It will start charging automatically. The
icon will be displayed once the battery is fully charged. Disconnect the charger from the phone.
ƒ You can also charge your phone in the cradle charger. Insert the small end of the charging cable
into the charging port on the back of the cradle charger. Insert the power plug into a power outlet.
Place the phone, screen facing forwards, atop the connectors. The icon
once the battery is fully charged. Remove the phone from the cradle charger.
Note:
ƒ When a travel charger and its accessories are used to charge the battery, please check if they
are original or recognized by the original manufacturer. Using other accessories can damage your
mobile phone and present a risk.
ƒ Always use the accessories indoors, in dry places.
ƒ Do not throw the battery into the fire. Damaged batteries can cause an explosion.
ƒ Refer to the detailed safety instructions concerning the precautions for use of the battery.
ƒ Do not leave the battery connected to a charger for longer than 12 hours, overcharging may
shorten its life.

5. INITIAL SETUP

5.1 Turning the
Long press the red
Note: If no SIM card is inserted or if the SIM card is damaged, the screen indicates
"Insert SIM".
5.2 First time setup
When a SIM card is inserted and the phone is turned on for the first time, you are prompted to
make the following settings sequentially.
ƒ Input a PIN code
ƒ Select a language
ƒ Set the date and time
To manually set the date and time at a later date, go to Settings -> Phone -> Time and date -> Set
time / date.
To manually set a language, go to Settings -> Phone -> Language.
phone ON / OFF
key to turn the phone on or off.
Use the keypad to input numbers, then select OK to confirm.


Use the
to confirm.

Use the
saving field, Use the numeric keys to input values. To select
a digit position, press the
off daylight saving, press the
confirm the settings.
means that the battery is low.
/ keys to select a language then select OK
/ keys to select the time / date / daylight
and
8
will be displayed
keys. To turn on or
or key. Select OK to
is