Samsung NSG6 85 Series User Manual page 49

Problem Cause
Very large or The wrong burner orifice
yellow surface is installed.
burner flames.
Surface burners The oven door lock is
light but oven turned on.
burners do not
light.
The Gas Pressure
Regulator shut off switch
is in the off position.
Oven
Problem Cause
The oven control There may be an issue
beeps and displays with your oven. See the
an information 'Information codes' chart
code. on page 53.
Action
Check the burner orifice size.
Contact your installer if you
have the wrong orifice (LP
gas instead of natural gas or
natural gas instead of LP gas).
The display will show the
Lock icon. Hold the oven door
open and Tap and hold for
3 seconds. The oven will beep
and the Lock icon will turn off.
Call a qualified service
technician.
Action
Tap Stop, and then restart the
oven.
If the problem persists,
disconnect all power to the
range for at least 30 seconds
and then reconnect the power.
If this does not solve the
problem, call for service.
Problem Cause
The oven will not The oven is not
turn on. completely plugged into
the electrical outlet.
A fuse in your home
may be blown or the
circuit breaker may have
tripped.
The oven The oven thermostat
temperature is too needs adjustment.
hot or cold.
The oven burner The oven door lock is
will not shut off. turned on.
The Sabbath function has
been activated.
Oven fan is making The cooling fan is not
a noise, or won't visible, but you will hear
turn off. it running whenever
the electronics get hot
* Slide-In oven and turn off when the
model only. electronics are cool.
Action
Make sure the electrical plug
is fully inserted into a live,
properly grounded outlet.
Replace the fuse or reset the
circuit breaker.
See page 36.
The display will show the
Lock icon. Hold the oven door
open and tap and hold for
3 seconds. The oven will beep
and the Lock icon will turn off.
SAb and the time of day will
show in the display. All other
controls and signals will be
deactivated. To turn off the
oven only.
To cancel the Sabbath function
and reactivate the controls and
signals, Tap and hold for
3 seconds.
This is normal operation to
cool the oven, cooling fan
automatically shuts down
when the oven cools.
English 49