Advertisement
Available languages
Available languages
EN
Height adjustment
The machine includes a height adjustable protective hood
1. Open the three wing nuts
2. Pull the brush rim down until the depth gauge can be turned
3. Adjust the required milling depth.
4. Push the brush rim up again
5. Retighten the wing nuts
Dust exhaust
Dust which occurs during your work is hazardous to health. That is
why it is advisable to use a de-duster and to wear a dust mask. The
machine should be connected to a professional industrial vacuum
cleaner, which can be connected directly to the protective hood's 38mm
hose connector.
Maintenance
Before the beginning of the maintenance or repair works you have to disconnect the plug from the mains.
Repairs may be executed only by appropriately qualified and experienced personnel.
After every repair the machine has to be inspected by an authorised electrician. Due to its design, the machine needs a minimum of care and maintenance.
However, the following points have to be observed:
- Always keep the power tool and the ventilation slots clean.
- During work, please pay attention that no particles get inside the machine,
- In case of failure, a repair has to be carried out by an authorised service workshop.
Environmental protection
In order to avoid damages on transportation, the tool has to be delivered in solid packaging. Packaging as well as unit and accessories are made of recyclable
materials and can be disposed accordingly.
The tool's plastics components are marked according to their material, which makes it possible to remove environmental friendly and differentiated because
of available collection facilities.
Only for EU countries
Do not dispose of electric tools together with household waste material!
In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with
national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible
recycling facility
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of
the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line with similar features and may not
be included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection or replacement work, including maintenance and special adjustments, must only be carried out by
technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The manufacturer and the
importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment.
4
WWW.NIKOLAOUTOOLS.COM
Advertisement
