Advertisement
Important Note:
Caution: DO NOT SWITCH ON THE MOTOR until the desired temperature
has been reached and maintained for at least 15 minutes. Failure to do so
may result in damaged equipment.
Ensure the FAN, HEATERBAND / PID and MOTOR SCREW switches are in an
upright position before turning the machine on. As shown in the image
below.
Ensure that you acquaint yourself with the proper handling guidelines for
the material you are using, particularly its melting point. Neglecting to do so
may compromise the functionality and potentially damage the equipment.
Please bear in mind that the quality of the extruded filament is influenced
by factors beyond just the operation of the machine. Considerations such as
room humidity, temperature, material humidity, and ensuring the correct
temperature settings all play crucial roles.
STEP 1. Familiarization:
Familiarize yourself with the following switches; FAN SWITCH, HEATERBAND
SWITCH / PID, MOTOR SCREW SWITCH, EMERGENCY POWER SWITCH, MAINS
POWER SWITCH.
Operation Instructions
8
MAINS
POWER
SWITCH
Advertisement
