Advertisement
High Torque 50 RPM Motor:
The extruder features a robust high-torque motor operating at 50 revolutions per
minute (RPM). This high torque capability ensures efficient and consistent
filament extrusion even when processing challenging materials or operating
under demanding conditions. The motor's power, coupled with its controlled
RPM, contributes to the reliability and performance of the Noztek PRO/PRO HT ,
making it suitable for a wide range of filament production requirements.
Multi-Stage Stainless Steel Single Screw:
The Noztek PRO/PRO HT incorporates a multi-stage stainless steel single screw,
designed to enhance the extrusion process. The multi-stage configuration allows
for optimized material processing and melting. The stainless steel construction
ensures durability and resistance to corrosion, making it suitable for extruding
various materials, including those with unique properties or specific processing
requirements.
5. Safety Information:
• Warnings: See safety sheet
• Recommended Safety Gear: See safety sheet
• Emergency Shutdown Procedures:
In the event of an emergency, firmly press the red mains switch located at the
front of the machine. This action will swiftly deactivate the power supply, bringing
all ongoing processes to an immediate halt.
6. Operating Instructions:
• Step-by-step instructions for safe and proper use of the product: See safety
sheet and guide
• Start-up and Shutdown Procedures: See guide
• Control Panel Layout: See guide
• Maintenance and Cleaning Guidelines: See maintenance sheet.
7. Technical Diagrams:
• Available upon request.
8. Performance Data:
• Heater bands:
Equipped with two distinct, PID controlled heater bands, capable of reaching
temperatures up to 600°C.
• Hopper capacity:
750 gram maximum, 50 gram minimum.
• Extrusion Output Rate:
The Noztek PRO/PRO HT demonstrates an impressive extrusion capacity, capable
5
Advertisement
