Operation Using The Central Control Unit; Incorrect Operation - WAREMA C 80 A8 Instructions For Use And Maintenance Manual

Operation
Raising using the sunblind push button/venetian
blind switch
3.3 Operation using the central control
unit
CAUTION
Product damage from failure of the external
control unit! The control unit is not functional
under extreme conditions (e.g. power failure or
malfunctions).

Set the external control unit to manual if
you are going to be away.

NOTE

Adjust the central control unit in such a way
that continuous operation of the motor is
avoided. The motors used in these products
are not intended for continuous operation. The
integrated thermal protection will switch the
motor off after approx. 4 minutes. The product
will be ready for use again after approx. 10 to
15 minutes.

Instructions on how to operate this feature are
contained in a separate manual.
[B867400_1] - EN / 20.07.11
To raise the external
venetian blind:

Press the "UP" button
and hold if necessary.
or

Turn the toggle switch
to the left and hold if
necessary.
To stop the venetian blind
in any position:

Release the "UP"
button or press the
"Stop" button.
or

Release the toggle
switch or turn it back.
The drive switches off
automatically in the upper
limit position.
Page 8 of 16
3.4

Incorrect operation

Operation: general information/limiting access to the
operating elements

Only operate the
external venetian blind
if it is in technically
perfect condition.

Stop operation
immediately if the unit
is damaged. Inform
your qualified specialist.

Move the external
venetian blind to the
upper limit position and
take it out of service.

Do not let children play
with the operating ele-
ment, e.g. the hand-
held transmitter.
Subject to change without notice.