Table of Contents
Related Manuals for WAREMA FS
Summary of Contents for WAREMA FS
- Page 1 WAREMA Pleated blind with cord operation Type FS, S1, S2, XR1 Instructions for installation, use and maintenance To be handed over to the operator. Please keep for future use. Valid from 22 March 2016 Document number 2007644 [Rev. 4 - en]...
-
Page 2: Table Of Contents
Introduction........................3 Information on safety............................ 3 Information on the target group and application of these instructions............3 Basic safety instructions..........................3 Installation FS, S1, S2, XR1 without cable guidance............4 Overview............................... 4 Rabbet installation............................4 Angle bracket installation..........................5 Installation of FS with cable guidance................6 Rabbet installation............................ -
Page 3: Introduction
Contents These instructions are an integral part of the following product: Pleated blind with cord operation Type FS, S1, S2, These instructions contain important information on the handling, installation, commissioning, operation, care and maintenance of this item. -
Page 4: Installation Fs, S1, S2, Xr1 Without Cable Guidance
Installation FS, S1, S2, XR1 without cable guidance Installation FS, S1, S2, XR1 without cable guidance Overview Type FS Type S1, S2 Type XR1 Rabbet installation Measuring and drilling the fixing points 15 mm 17 mm 3 mm 3 mm... -
Page 5: Angle Bracket Installation
Installation FS, S1, S2, XR1 without cable guidance Installing the pleated blind (see Chapter 4/Page Dismantling Angle bracket installation Measuring and drilling the fixing points = x - 2 mm = x - 2 mm Installing the pleated blind 2007644 [Rev. 4 - en]/2016-03-22... -
Page 6: Installation Of Fs With Cable Guidance
Installation of FS with cable guidance (see Chapter 4/Page Dismantling Installation of FS with cable guidance Rabbet installation Measuring and drilling the fixing points 15 mm 17 mm 3 mm 3 mm 3 mm 3 mm 3 mm 3 mm... -
Page 7: Angle Bracket Installation
Installation of FS with cable guidance (see Chapter 4/Page Dismantling Angle bracket installation Measuring and drilling the fixing points = x - 2 mm = x - 2 mm Installing the pleated blind 2007644 [Rev. 4 - en]/2016-03-22 Page 7 | 10... -
Page 8: Winding Systems
Winding systems (see Chapter 4/Page Dismantling Winding systems Installation procedure Transfer the fixing points of the cord winders to the mounting substruc- ture. Attach the cord winders to the mounting sub- > 1500 > 1500 structure. Push the cover caps into the cord winders. -
Page 9: Operation With Lifting Cord
Operation with lifting cord Operation with lifting cord WARNING Raise and lower the pleated blind by pulling Young children can become the lifting cord. strangled by loops in the pull cords, chains, belts and inner cords used to operate the product. To avoid strangulation and entanglement, keep cords out of reach of young children. -
Page 10: Maintenance
Subject to the statutory period of limitation for warranty claims. This requires regular maintenance. The warranty does not include wear parts or optical changes in line WAREMA Renkhoff SE - Hans-Wilhelm-Renkhoff-Straße 2 - 97828 Marktheidenfeld - Germany www.warema.com - info@warema.com...