Page 1
WAREMA black-out blinds Type VDA 13 Operating instructions For handing out to users Valid from 23. February 2005 Document no. [B866108_0.fm] - EN...
Regarding the following instruction manual These instructions describe the operation of correctly Please read the instructions carefully before operating your installed black-out blinds of type VDA 13 in the following blinds, adhere to the operating steps and keep in mind the versions: helpful hints and recommendations.
The factory order number and item number are printed on the drop rod and box (position of components see Fig. 1 on page 5) of every WAREMA black-out blind type VDA 13. This allows the manufacturer to clearly identify each individual product.
The black-out blind type VDA 13 can be supplied as a left or operating theatres. right roller, crank operated or motor operated, and individually The room is darkened by lowering the blind to the required or as a group system.
Product description Black-out blind type VDA 13 Technical data Motor operation Power supply 230 V AC Current consumption depends on motor: 0.3 to 1 A Power consumption depends on motor: 75 to 230 W Motor protection class IP44 Size/weight max. dimensions (WxH) 2 m x 6 m (individual units) or 4.5 m x 2.7 m (individual unit), max.
They are indicated by a symbol and a signal word. Read exposed due to damage (e.g. electrical cables/lines). If this these instructions carefully before operating the product. This is the case, please contact your WAREMA dealer. is to protect yourself and to prevent damage to the black-out –...
Operation Black-out blind type VDA 13 Safety information Warning Caution Risk of fatal injury from blocking of escape routes Danger from broken glass. and/or windows with smoke/heat extraction control units. In direct sunlight, the blind should always be extended to the end position to avoid large Inform your dealer or the safety officer responsible temperature gradients in the glass panes.
Operation Black-out blind type VDA 13 Operation with switch Operation with motor and external control device The motor drive makes it very convenient to operate the black-out blind. The drive is an AC asynchronous motor for Warning short-term operation. It is equipped with a thermal protection...
Irregular situations/functions Black-out blind type VDA 13 Malfunction What to do if... Fault Cause Elimination Motor is not operating – No power Check the power fuse (electricians only) – Existing connector is incorrectly Reconnect the connector according to the circuit...
Risk of falling. switched off. Use appropriate climbing equipment. If a blind needs to be replaced, please contact your WAREMA Switch off the control unit or automatic system dealer or the manufacturer. when cleaning or caring for the unit.
Risk of personal injury or property damage from use of incorrect spare parts. incorrect repairs. Only use spare parts approved by WAREMA. If there is a need for repair, please contact your Please contact your WAREMA dealer or the WAREMA dealer or the manufacturer.
Glossary Single unit The black-out system consists of only one system with a drive Technically correct Work performed in a technically correct manner Coupled unit The black-out system consists of several blinds with a drive Light-proof Light will not enter into the room if the blind is closed, i.e.