Operation; Operation With The Crank; Operating The External Venetian Blind Drive - WAREMA C 80 A8 Instructions For Use And Maintenance Manual

3

Operation

3.1

Operation with the crank

Lowering/raising using the crank
Tilting the slats with the crank
[B867400_1] - EN / 20.07.11

Turn the crank clock-
wise/anti-clockwise.
Stop the venetian blind in
any position:
Slow the turning movement
of the crank down before
fully lowering or raising the
unit.
Do not turn any further
when you feel a resistance.

Turn the crank in the
desired direction. The
slat tilt changes.
Every additional turning
motion tilts the slats further.
If the crank is turned
further, the blind moves in
the selected direction.
Page 7 of 16
3.2 Operating the external venetian blind
drive
Lowering using the sunblind push button/venetian
blind switch
Tilting the slats using the sunblind push but-
ton/venetian blind switch
Operation
To lower the external
venetian blind:

Press the "DOWN"
button and hold if nec-
essary.
or

Turn the toggle switch
to the right and hold if
necessary.
To stop the venetian blind
in any position:

Release the "DOWN"
button or press the
"Stop" button.
or

Release the toggle
switch or turn it back.
The drive switches
automatically in the lower
limit position.
To change the slat position:

Press the "DOWN" or
"UP" button briefly.
or

Turn the toggle switch
to the left or right brief-
ly.
Every additional brief
operation of the button tilts
the slats further.
If the operating element is
activated for a longer
period, the blind moves in
the selected direction.
Subject to change without notice
off