Mechanical Dimensions - Motherboard Mounting - Iridium 9602 Development Manual

Iridium Communications Inc.
9602 SBD Transceiver Product Developers Guide
Revision 5`
2.2 Mechanical Dimensions – Motherboard Mounting
The 9602/9602N SBD Transceiver must be fitted within an enclosed host system. With appropriate external
connections, the host system motherboard and host system enclosure can be designed to meet full transceiver
regulatory tests.
The 9602/9602N SBD Transceiver is provided with two mounting holes, one at each diagonal corner. The
module should be assembled onto the motherboard of the host system, by pushing the module onto matching
connectors on the motherboard and then securing the diagonal mounting holes to the motherboard using
mechanical fasteners.
The figures and tables below provide mechanical information design information to connect a 9602/9602N
module to a host system motherboard.
Figure 3 General assembly of the 9602/9602N onto motherboard of the host system.
Proprietary & Confidential Information
16
Distribution of guide restricted to product developers only. • Information contained in this guide is subject to change without notice.