Mechanical Dimensions - Motherboard Mounting - Iridium 9603 Developer's Manual

Iridium 9603 SBD Transceiver Product Developers Guide
Revision 3.1
Mechanical Dimensions – Motherboard Mounting
2.2
The Iridium 9603/9603N SBD Transceiver must be fitted within an enclosed host system. With appropriate external connections,
the host system motherboard and host system enclosure can be designed to meet full transceiver regulatory tests.
The Iridium 9603/9603N SBD Transceiver is provided with two mounting holes on the opposite side from the system connector.
The module should be assembled onto the motherboard of the host system, by pushing the module onto matching connectors on
the motherboard and then securing the two mounting holes to the motherboard using screws.
Figure 3. Motherboard mounting for the 9603/9603N Transceiver
Proprietary & Confidential Information
14
Distribution of guide restricted to product developers only • Information contained in this guide is subject to change without notice.