Zehnder Rittling ComfoAir Flex Quick Manual

Advertisement

Quick Links

Decorative radiators
Comfortable indoor ventilation
Zehnder ComfoAir Flex
Quick Guide
Refer to the full manual for the complete range of information and instructions.
For the latest version of the full manual please scan the QR-code on the front of the unit
or visit https://www.zehnder.co.uk
If you have questions about the ComfoAir Flex, call our Technical Team on 01276 408404
or email ventilation@zehnder.co.uk.

Description

The ComfoAir Flex is a ceiling mounted balanced ventilation system with heat recovery for energy-efficient ventilation in
houses. The ComfoAir Flex removes dirty air from the wet rooms and supplies the same amount of fresh air to the dry rooms.

Use of the ComfoAir Flex

the ComfoAir Flex
■ The ComfoAir Flex can only be used when
it has been installed according to the
instructions and guidelines in the ComfoAir
Flex installer manual.
■ Do not open the casing. The installer makes
sure that all parts that can cause personal
injury are safely contained within the casing.
■ The ComfoAir Flex can be used by
children aged from 8 years and above and
persons with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning use of
the unit in a safe way and understand the
hazards involved.
■ Children must not play with the ComfoAir
Flex.
■ Children must not clean and maintain the
ComfoAir Flex unsupervised.
Heating and cooling ceiling systems
ComfoAir Flex 250 and 350
Clean air solutions
Read the manual carefully before use.
Keep the Quick Guide near the ComfoAir Flex
to make sure that you always know where the
Quick Guide is.
Ensure that the gaps under or near doors are
never obstructed.
Condensation may occur on the outside of the
ComfoAir Flex. It is not necessary to remove it.
Dispose the ComfoAir Flex in an environmentally
friendly manner. Do not dispose the ComfoAir
Flex with your household waste.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ComfoAir Flex and is the answer not in the manual?

Questions and answers

Summary of Contents for Zehnder Rittling ComfoAir Flex

  • Page 1 The ComfoAir Flex is a ceiling mounted balanced ventilation system with heat recovery for energy-efficient ventilation in houses. The ComfoAir Flex removes dirty air from the wet rooms and supplies the same amount of fresh air to the dry rooms.
  • Page 2 Read all the safety information carefully before you use the Electrical hazard ComfoAir Flex for the first time to make sure that you use the ventilation unit safely and correctly. Refer to the full manual for the necessary information and the applicable safety regulations and installation regulations.
  • Page 3 Installation (INSTALLER) Refer to the full Installer manual of the ComfoAir Flex for the necessary information and the applicable safety regulations. The entire installation must comply with the applicable (safety) regulations as stated in: ■ local EU Standard on safety provisions for low-voltage installations;...
  • Page 4 Installation steps (INSTALLER) Zehnder ComfoAir Flex Installation template Ø 8mm RIGHT LEFT configuration configuration always the best climate 1 Use the installation template on the 2 Remove all the turnable bends 3 Determine the direction of the airflow. box for the position of the unit and the before installation to prevent the attachment of the brackets on the unit.
  • Page 5 2 ■ Start up the Zehnder ComfoControl 3 Follow the instructions in the App Zehnder ComfoControl App. App and select the ComfoAir Flex. and push the connection button ■ Connect the unit to the power. ■ Select “OK” for direct connection (1x) on the user interface of the unit.
  • Page 6 Operation (USER) You can operate the unit with the Zehnder ComfoControl App and with Zehnder controls, such as the Zehnder ComfoSwitch C and Zehnder CO2 Sensor C. The user interface shows important information about the status of the unit and is used for installation and maintenance. It is recommended to change the filters via the filter wizard of the Zehnder ComfoControl App.
  • Page 7 ■ Make sure that the ComfoAir Flex is connected to the power supply. ■ For the first time use: Zehnder recommends to delete all the previous WiFi settings and connections to the ComfoAir Flex - push the connection button (G) longer than 10 seconds.
  • Page 8 Zehnder Group UK Ltd • Concept House, Watchmoor Point, Camberley, Surrey, GU15 3AD T +44 (0) 1276 605800 • ventilation@zehnder.co.uk • www.zehnder.co.uk...

This manual is also suitable for:

Comfoair flex 250Comfoair flex 350

Table of Contents