Mirage VENTUS ALPHA IVADH361A Owner's Manual & Installation Manual page 20

Regular inst allat ion inst ruct ions
Please follow these steps to perform Vertical
up installation and Horizontal left installation:
1. Open the upper cover.
2. Open the cover of the electronic control box.
3. Connect the wire according to the wiring
diagram.
4. Connect the pipes.
5. Install the drainage pipes.
Reversing inst allat ion inst ruct ions
For the Horizontal right installation and Vertical
down installation, the direction of the evaporator
should be changed . Please do it according to the
following steps:
1. Remove the cover plate of the lter ,then take
the lter o .
2. Remove the upper cover assembly.
 Page 20 
20
3. Remove evaporator cover plate.
4. Remove T1、T2、T2A、T2B temperature sensor
plug、electronic expansion valve wiring
Disassemble T1、T2、T2A、T2B temperature
sensor and electronic expansion valve
NOTE: T2A and T2B are only available for some
models.
T2
T2A&T2B
T1
EEV