Table Of Contents - JVC AV-35750 Service Manual

AV-35750
AV-35770
4) Select the PIP, The screen shown in Fig.6 will be displayed in the
LEFT / RIGHT KEY is pressed.
5) If the UP / DOWN KEY is pressed, the PIP MODE screen shown in
Fig.7 is displayed and the PIP setting can be performed.
6) If any of the THEATER / LOW LIGHT / HIGH LIGHT / RF AFC 1 /
RF AFC 2 / l2C BUS CTRL items are selected and the LEFT /
RIGHT KEY is pressed, the screens shown in Fig. 8, 9, 10, 11, 12
and 13 are displayed respectively and the settings or verifications can
be performed.
TINT XXX GDRIVE XXX
GOLOR XXX BODRIVE XXX
PICTURE XXX
BRIGHT XXX
DETAIL XXX
setect sy[ally]
OPERATE BY[<][>] exit By
Fig. 8 THEATER MODE
@ BRIGHT 4] [>]
XXX
XXX XXX
Fig. 9 LOW LIGHT MODE
RF AFC 1 ON
FINE XX
STATUS XXXXXXXX
RF AFC 2 ON
FINE XX
SELecT ByY[al[y]
OPERATE BYL][>] exit BY @
Fig. 12 RF AFC 2 MODE
{Do not adjust]
setect By{ally]
opeRATE BY[<][>] exit By @®
Fig. 11. RE AFC 1 MODE
14 (No.51130)
seLect pBy[al[y]
Fig. 6
[ally] (<)>)
1. ASPECT XXX
Fig. 7 PIP MODE
HIGH LIGHT
XXX XXX
Fig. 10 HIGH LIGHT MODE
2G BUS ON
secect sBy[all[¥]
OPERATE BY[4][*] Exit BY @
Fig. 13 120 BUS CTRL MODE
[Fixed ON]