OPERATOR MANUAL
IMPORTANT INFORMATION, KEEP FOR OPERATOR
USA & Canada, 866-339-8515
4003 Collins Lane, Louisville, KY 40245
www.kelvinatorcommercial.com
THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE. READ,
UNDERSTAND AND FOLLOW THE INSTRUCTIONS AND WARNINGS
CONTAINED IN THIS MANUAL.
FOR YOUR SAFETY Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other appliance.
NOTIFY CARRIER OF DAMAGE AT ONCE It is the responsibility of the
consignee to inspect the container upon receipt of same and to determine
the possibility of any damage, including concealed damage. Electrolux
Professional suggests that if you are suspicious of damage to make a
notation on the delivery receipt. It will be the responsibility of the consignee
to file a claim with the carrier. We recommend that you do so at once.
Manufacture Service/Questions 866-339-8515.
EQUIPMENT DESCRIPTION
MODEL NO.
EFFECTIVE
VOLUME((FT^3)(
KCICDC4FH
6
KCICDC6FH
8.48
KCICDC8FH
10.92
KCICDC10FH
13.91
Information contained in this document is known to be current and accurate at the time of printing/creation. Reference our product line website for the most updated product
information and specifications. © 2023 Electrolux Professional, Inc. All Rights Reserved.
TDA
NET WEIGHT
OVERALL DIMENSION
(FT^2)
(LBS)
(IN)
3.7
181
32-7/8" x 33" x 50"
5.06
240
42-1/2" x 33" x 50"
6.98
271
53-1/8" x 33" x 50"
8.89
335
67-3/4" x 33" x 50"
PART NUMBER HB_738371_9F73837100, REV. A (11/23)
This manual provides information for:
DIPPING CABINET
RETAIN THIS MANUAL FOR FUTURE REFERENCE
NOTICE: Due to a continuous program of product improvement, Electrolux
Professional reserves the right to make changes in design and specifications
without prior notice.
NOTICE: Please read the entire manual carefully before installation. If certain
recommended procedures are not followed, warranty claims will be denied.
RECEIVING & INSPECTING THE EQUIPMENT
Even though most equipment is shipped crated, care should be taken during
unloading so the equipment is not damaged while being moved into the building.
1. Visually inspect the exterior of the package and skid or container. Any
damage should be noted and reported to the delivering carrier immediately.
2. If damaged, open and inspect the contents with the carrier.
3. In the event that the exterior is not damaged, yet upon opening, there is
concealed damage to the equipment, notify the carrier. Notification should
be made verbally as well as in written form.
4. Request an inspection by the shipping company of the damaged equipment.
This should be done within 10 days from receipt of the equipment.
5. Be certain to check the compressor compartment housing and visually
inspect the refrigeration package. Be sure lines are secure and base is still
intact.
6. Freight carriers can supply the necessary damage forms upon request.
7. Retain all crating material until an inspection has been made or waived.
1. Canopy
2. Glass lid
3. Cabinet
4. Control panel
5. Power cord
6. Castor