Getting Started; Power Supply Assembly (If Included) - Honeywell Xenon 1902HC Quick Start Manual

Note: Refer to your user's guide for information about cleaning your
device.
For localized language versions of this document, go to
www.honeywellaidc.com.

Getting Started

Turn off the computer's power before connecting the base, then
power up the computer once the base is fully connected. When the
base is connected and powered up, put the scanner in the base to
establish a link. The green LED on the base flashes to indicate the
scanner's battery is charging.

Power Supply Assembly (if included)

Note: The power supply must be ordered separately, if needed.
http://manualforhoneywellthermostat.com