Toyota Dyna100 EE 2012 Manual page 86

80
ENGINE (IGNITION) SWITCH, TRANSMISSION AND PARKING BRAKE
Engine (ignition) switch
"START"—Starter motor on. The key
will return to the "ON" position when
released.
For starting tips, see page 131 in Section
3.
"ON"—Engine on and all accessories
on. Before starting, glow plugs on and
engine preheated.
This is the normal driving position.
"ACC"—Accessories such as the radio
operate, but the engine is off.
"LOCK"—Engine is off and the steering
wheel is locked. The key can be re-
moved only at this position.
You must push in the key to turn the key
from "ACC" to the "LOCK" position.
When starting the engine, the key may
seem stuck at the "LOCK" position. To
free it, first be sure the key is pushed all
the way in, and then rock the steering
wheel slightly while turning the key gently.
It is not a malfunction if the needles on
all meters and gauges move slightly when
the engine switch is turned to the "ACC",
"ON" or "START" position.
Dyna100/150_EE
CAUTION
Never remove the key when the ve-
hicle is moving, as this will lock the
steering wheel and result in loss of
steering control.
NOTICE
Do not leave the engine switch in the
"ON" position if the engine is not
running. The battery will discharge.