Table of Contents
Advertisement
FEATURES - CONTINUED
Charge Portable Devices with USB port
Charge your personal device during your workout using the
fitness equipment's on-console USB port. To charge your
mobile electronics make sure the fitness equipment power is
on.
Step 1: Connect your USB charging cable (not included) to
the USB Power Port and to your device.
Step 2: Check to make sure your device icon indicates it is
charging.
NOTE:
•
USB charging cable is not included, make sure compatible
USB charging cable is being used.
•
The USB port on the console is capable of powering USB
devices. It provides up to 5Vdc/1.0 amp of power and
meets USB 2.0 regulations. You will not be able to save
your workout data to a USB via this port; it is used for
charging purposes only.
•
** Your device "charging" icon may or may not indicate
it is charging. Depending on the amount of current your
particular device requires for charging the icon may not
be on but your device is still charging, but possibly at a
lower charge rate.
Incline
•
Incline may be adjusted anytime after belt movement.
•
Press and hold the +/- or Up/Down keys (console or
handrail) to achieve desired level of effort. You may
also choose a more rapid increase/decrease by simply
pressing the desired level on the console.
•
The display will indicate incline percent increases in
increments of 0.5 as adjustments are made.
•
The incline will return to zero unless the main power
switch or safety key are turned off while at a higher
setting.
24
Advertisement
Table of Contents
