Using An Outside Power Source; Step3: Turningthe Poweron - Sony HANDYCAM DCR-TRV361 Operation Manual

Hide thumbs Also See for HANDYCAM DCR-TRV361:
Table of Contents

Advertisement

You can use the AC Adaptor
as the power
source when you do not want the battery
to
run out. While you are using the AC Adaptor,
the battery
pack will not lose its charge even
when it is attached
to your camcorder.
PRECAUTION
Even if your camcorder
is tamed olt; AC power
(house current) is still supplied to it while
connected
to the wall outlel via the AC Adaplor.
Connect
your camcorder
as shown
in
"Charging
the battery
pack"
(p. 14).
Step3: Turningthe
poweron
You need to slide the POWER
switch
repeatedly
to select the desired
power
mode
to record or play.
When using this camcorder
for the first time,
the [CLOCK
SET] screen appears
(p. 19).
While pressing
the green button,
slide the
_.
POWER
switch
down.
The power turns on.
To enter the recording
or playing mode, slide
the switch repeatedly
until the respective
lamp
_-
lbr the desired power mode lights up.
• CAMERA-TAPE
mode: To record on a tape.
• CAMERA-MEMORY
mode: To record oll a
"Memory
Stick."
• PLAY/EDIT
mode: To play or edit pictures on
a tape or "Memory
Stick."
To turn off the power
Slide the POWER switch up to (CItG) OFF.
O
r_
O
_O
Getting started
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Handycam dcr-trv460

Table of Contents